35000

Equalizer Cable 33'-Long

Equalizer Cable  Fits Model: Challenger Lift Model 35,000 Overall Length: 33’ Long (10058.40 mm) Cable Diameter: 3/8” (9.525 mm) Cable Material: Galvanized Steel Cable Ends: (2) Threaded Studs 3/4”-10...

Equalizer Cable 31' 10"-Short

Equalizer Cable 31' 10"  Fits Model: Challenger Lift Model 35,000 Overall Length: 31’ 10” Long (9702.80 mm) Cable Diameter: 3/8” (9.525 mm) Cable Material: Galvanized Steel Cable Ends: (2) Threaded Studs...

Rubber Arm Pad Kit for Challenger (4-PACK)

Rubber Arm Pad Kit (4) for Challenger Pad is 5-3/4" wide and 1/2" Thick An inexpensive replacement part to help keep the vehicle stable and for safer lift operation.  Need additional replacement parts for your Challenger Lift? See our hundreds of...

Swivel Arm Pin

Swivel Arm Pin  6" L x 1.5" Dia. Inspect all related components for safe lift operation. Need additional replacement parts for your Lift? See our hundreds of other listings. Don’t see what you need, or have a question? Email For Availability...

Oversize Slider Block 1/8"

Oversize Slider Block with 1/8" Metal Insert 2.88" L x 1.38" H  For Lifts with Excessive wear.  NOTE:If slider blocks have dropped out of carriage, order oversize slider blocks.36000: takes 16 of the BH-7225-23 or -23OS37000 & 39000: could...

Slider Block with Metal Insert for Challenger Lifts

Slider Block with Metal Insert for Challenger/Ammco Lifts Worn Slider Blocks cause non-smooth lift operations. Replace as a set (16). NOTE; If slider blocks have dropped outof carriage, order oversize slider blocks.36000: takes 16 of the BH-7225-23...

Limit Switch Overhead Square for Challenger

Limit Switch Overhead Square for Challenger  A vital component for safe lift operation. Replace if faulty. Need additional replacement parts for your Rotary Lift? See our hundreds of other listings. Don't see what you need, or have a question? Email...

Cylinder Seal Kit - Lantex

Cylinder Seal Kit - Lantex For Challenger Models w/ Lantex Cylinders: 20000 • 21000 • 26000 • 27000 • 28000 • 30000 • 31000 • 33000 • 35000 How to Identify Lantex Cylinders: Screw-On Gland (cap) NPT pipe thread or...

Cylinder Seal Kit - Holmac

Cylinder Seal Kit - Holmac For Challenger Models w/ Holmac Cylinders: 20000 • 21000 • 26000 • 27000 • 28000 • 30000 • 31000 • 33000 • 35000 How to identify a Holmac Cylinder: There will be a "H" or "HC"...

Hydraulic Cylinder for Challenger

Hydraulic Cylinder for Challenger 2.5" Bore, 36.5" Stroke.  See Repair Kits below: BH-7225-59 2-1/2" bore x 36-1/2" stroke (Holmac) BH-7225-60 2-1/2" bore x 36-1/2" stroke (Arlington) BH-7226-60 2-1/2" bore x 36-1/2" stroke (Lantex) BH-7226-10...